When your water boiler doesn’t work as intended, you can count on the professionals at Hurley & David. With over 60 years of experience in boiler servicing, you can be sure that our boiler technicians have the knowledge and experience required to perform fast and efficient services. Whether you are in need of simple boiler maintenance, extensive repairs, or a full boiler replacement, Hurley & David is the HVAC contractor to call. In fact, we guarantee 100% satisfaction on all our services and are available for 24 hour emergency boiler service all around Springfield MA and Northern CT.
That’s where we come in.
Boiler Service in Western Massachusetts
Homeowners in the Springfield MA area need as much heating power as possible to make it through the harsh Massachusetts winters and, when it comes to sheer heating power, you can’t beat a boiler. In addition to being the highest-capacity heating system on the market, boilers are easily the longest-lasting. A good boiler can heat your home for 30 years or more — as long as it’s properly maintained and regular boiler service and repairs is done.
Looking for boiler service near you? With over 50 locations around Massachusetts, there is always a Hurley & David boiler technician nearby. With so many locations, our technicians are able to provide emergency boiler repair, for fast and efficient boiler service.
Our boiler technicians can handle anything between
Routine boiler repairs
At Hurley & David, we’ve been providing boiler heater repair in Springfield and Western Massachusetts for over 50 years. We know all hot water boiler makes and models inside and out.
We’ll be more than happy to bring our expertise to bear on your next boiler service need. We are experts when it comes to electric and gas boiler services.
Signs You Need Boiler Service
Some boiler problems are pretty obvious, while others are more subtle but just as important to catch and address. Common reasons to suspect trouble and expect to need a boiler maintenance service are:
- Inadequate heating
- Uneven heating–some radiators emit heat while others do not, or some are hotter than others
- Clanging or banging noises from the pipes or the boiler itself
- Leaks or dripping
- The boiler turns on and off constantly
- Unexplained increase in fuel usage even though you aren’t using more heat or hot water
- For gas boilers, a yellow or orange gas flame instead of blue
If you have any reason to suspect a problem with your boiler, it’s time to call professional boiler technicians for heating maintenance or a quick boiler tune-up. Our professional heating technicians can both provide gas boiler services and regular heating boiler repairs for repairs or replacement.
Why Choose Hurley & David For Your Boiler Service
We’ve already mentioned that boilers are meant to last a long time, and that means it’s particularly important to get any issues resolved quickly and completely to make sure you can get as much use as possible out of your heating system.
As experienced HVAC contractors and boiler technicians, we have the tools and expertise needed to fix every boiler issue thoroughly and deliver adequate heating boiler service. Not only can we provide all types of heating boiler repair services, but our technicians can also repair all types of boilers and provide adequate gas boiler services for instance.
We understand sizing, precision control, calibration, design, and all other aspects of efficient boiler servicing, and we believe in fixing the whole heating system instead of just patching up a single issue.
Our boiler service rates are affordable because we use our time and tools efficiently. More importantly, with our top-notch heating maintenance services, you’ll save plenty down the road thanks to your system’s increased energy efficiency and heating effectiveness. As always, our work is backed by our unbeatable guarantees:
- 1-year guarantee on boiler repairs
- Up to 10-year guarantee on equipment installation
- Up to 12-year guarantee on new HVAC equipment installation
- Up to 10-year guarantee on water heater installation
You know who to call for heating problems. We even provide 24 hour boiler repair services.
Updates to the Regional HVAC Equipment Efficiency and Testing Standards
Effective January 1, 2023, the U.S. Department of Energy (DOE) will update its efficiency and testing standards for residential and commercial HVAC equipment. All regulatory changes will differ by product type and region. Since the updated standards will result in price increases across all HVAC contractors, now is the time to buy the equipment you need for your home or business.
The minimum efficiency standards for residential and commercial air conditioners and heat pumps manufactured after January 1, 2023, will increase. This change will increase production efficiency and national energy savings while decreasing national energy consumption.
Northern U.S. & Canada
All split-system air conditioners, split-system heat pumps, and packaged units manufactured after January 1, 2023, must meet the updated standards. However, split-system air conditioners, split-system heat pumps, and packaged units manufactured before January 1, 2023, can be installed indefinitely. The efficiency rating for air conditioners will increase from 13 SEER to 15 SEER in these regions.
Split-system air conditioners manufactured before January 1, 2023, can’t be installed once the updated standards take effect. All installations of products that don’t meet the new standards must be completed by December 31, 2022. However, split-system heat pumps, single-packaged air conditioners, and single-packaged heat pumps manufactured after January 1, 2023, can be installed indefinitely. The efficiency rating for air conditioners will increase from 14 SEER to 15 SEER in both the Southwest and Southeast regions.
In addition to higher minimum efficiency standards, the M1 testing procedures used for residential and 3 to 5-ton light commercial, single-phase equipment manufactured on or after January 1, 2023, will increase. This change will produce more accurate SEER, EER, and HSPF efficiency ratings. Manufacturers will be required to re-test equipment using the new M1 Standard requirements as well as publish equipment efficiency ratings using the new efficiency metrics of SEER2, EER2, and HSPF2.